Configuring HP printer or MFP

1

Log in to the MFP's Web Interface with administrator rights.

Go to Networking Tab > Network Setting > SNMP section

2

Configure MFP's as follows:

Disable SNMP v1/v2
Enable SNMP v3 option
Set User name
Set Authentication Key
Set Privacy Key

Please note that HP devices are not able to generate Authentication key and Privacy key by them self. Web interface of HP device expects that these keys will be generated as localized keys. To generate the localized key please contact HP support to get a tool that will generate the localized key for you. The localized key is based on the MAC address of the HP device and password specified by you. Therefore the localized key is different for every device. Once you create the localized key for DES encryption using for example password 123456789 you can enter this localized key to both Authentication Key and Privacy key fields.

images/download/attachments/21955534/image2013-4-5_12_55_38.png

3

Then Save settings.

Configuring Y Soft SafeQ

1	Log in to the SafeQ Web Interface with sufficient rights to administer printers (for example, "admin")
2	Go to Devices > Printers selection and click the edit icon next to the device or double click on the device.
3	Go to Advanced tab. Set Alert message encoding to utf-8
4	Go to SNMP tab. Setup SNMP as follows: Choose SNMPv3 Set Username to value set in User Name field in HP MFP's Web Interface Set Context name to Jetdirect Set Authentication algorithm to MD5 Set Authentication password to value set in Authentication Key field Set Privacy algorithm to DES Set Privacy password to value set in Privacy Key field
5	Then click Save device.