Configure Toshiba device to work with YSoft USB card reader
YSoft USB card reader registration chapter must be done when the Toshiba MFP FW is lower version than FW which has YSoft USB card reader already preregistered.
List of Toshiba MFP firmwares which are compatible with YSoft USB card reader.
YSoft USB card reader registration
Prerequisites:
debug_s_usbcr.sh
usbhidReaderListAdd.txt
YSoft USB card reader
Toshiba device
Files debug_s_usbcr.sh and usbhidReaderListAdd.txt are part of installation package. They are stored in directory Card Reader Registration available under path _support\YSoft SafeQ Toshiba Terminal Embedded .
1) Get Vendor ID, Product ID of your USB card reader
For YSoft USB readers, following VID and PID are used:
Product | VID (Vendor ID) | PID (Product ID) |
YSoft USB card reader - USB keyboard mode | 214C | 0202 |
YSoft USB card reader - USB Sharp mode | 214C | 0205 |
Other products than listed above are NOT supported on the Toshiba MFP.
2) Create usbhidReaderListAdd file according to your Vendor ID, Product ID
1) Open the supplied sample device list, ”usbhidReaderListAdd.txt”, by the text editor.
2) Enter the Vendor ID, Product ID and Reader Name.
3) Registration should be 1 line per a unit. The Vendor ID, Product ID, and Reader Name should be divided by “:” (colon).
Note: The max. number of the devices to be registered should be 16.
3) Register USB card reader on your MFP
1) Copy the files usbhidReaderListAdd.txt and debug_s_usbcr.sh to the root of the USB memory.
2) Insert the USB memory to the device.
3) Normally start up the device.
4) A beep sounds when registration finishes. Remove the USB memory from the MFP to complete registration.