For some business reports it is required to collect counters from all devices. This page describes settings for such feature for embedded terminals. Counters are collected in regular intervals, same as for devices with hardware terminals. YSoft SafeQ keeps values of device counters per calendar day and for each device separately. The report with counters is available on YSoft SafeQ CRS in standalone data cube.

At a Glance

• About

• Creating an Embedded terminal with device counters collection

• Device monitor settings

1.

From YSoft SafeQ administration web interface Add new device manually.

2.

On Basic tab enter the name and IP address.

3.

On Terminal tab select Embedded terminal and enter all necessary.

4.

Back on the terminal check Tracking mechanism "Device dependent" and select Accounting driver from device driver list.

5.

Now you can Test selected tracking mechanism.

6.

Finish device configuration.

7.

Save a device.

device-monitor-terminals-check-interval

Procedure to check devices with terminals will be executed in a period defined. Only devices that were checked before device-monitor-no-terminals-interval minutes for the last time will be checked and updated in SafeQ database.
Used only if configuration property checkmanager-enabled is enabled.
Value is set in minutes.

device-monitor-terminals-interval

Regular device check (getting current counters of device) will be performed if the device was checked last time before the number of minutes entered.
Used only if configuration property checkmanager-enabled is enabled.
Values is set in minutes, default value is 1440 (=1 day).