Displaying the Service menu

To access most settings, first display the Site admins Service menu as described in this section.

There is similar steps for Terminal Professional v3.5 (the color one) and Terminal Professional v3.0 (the gray one bellow).

1

If the terminal displays a Place Card screen, tap the top corners 4 times:

- For TP v3.5: Tap left top corner > Tap right top corner > Tap left top corner > Tap right top corner
- For TP v3.0: Tap left top corner > Tap right bottom corner > Tap left top corner > Tap right bottom corner

images/download/attachments/21955545/enter_service_menu_new.png

OR

If the terminal displays a Keypad screen, touch the 0 button 9 times (000000000).

2

The terminal displays a keypad. Enter the PIN, then touch OK.

NOTE: There is two levels of service menu (Y Soft partners service menu and Site admins service menu). It depends on entered PIN code. Default PIN for Site admins menu is 0000. To get PIN for Y Soft partners menu, please contact Customer Service Support.

3

The terminal displays the Site admins Service menu or Y Soft Partners service menu, depending on entered PIN on login screen.

4

The is difference between this two levels of service menu in following options, which are available only from the Y Soft partners Service menu:

- Cluster support
- Debug mode
- Card reader
- Card reader test
- Interaction mode
- I/O Module
- I/O Module test
- Emergency update
- Change part. PIN