Konica Minolta - Configure and enable SSL

  1. Open your Web browser and enter the MFP's IP address. The MFP Web interface,"PageScope®," opens.

  2. On the PageScope Web Connection Login screen, select Administrator; then click Login. (If you are automatically logged in as a guest, log out and then log in again using the administrator account).
    NOTE: The PageScope Web interface varies according to the specific MFP.

    images/download/attachments/72093541/login_pagescope.png

  3. Enter the Administrator password for the MFP; then click OK.
    NOTE: The default password is 1234567812345678. 

  4. Select the Security tab ; then select Device Certificate Setting; Continue with selecting New registration.
    NOTE:     If the device already has a factory default settings certificate, delete it first and then create a new one.

    images/download/attachments/72093541/device_certificate_list.png

  5. Select Create and install a self-signed Certificate and click OK.

    images/download/attachments/72093541/create_device_certificate.png

  6. Enter information for the SSL certificate; then click OK.
    NOTE: The information you enter does not have to be valid (for example, the Admin E-mail Address does not have to be valid), except the Validity Period, recommend is 3650 days. The Mode using SSL/TLS setting applies only to PageScope Web Connection; you can set it to None without affecting OpenAPI's SSL capabilities. 
    images/download/attachments/72093541/create_and_install_certificate.png

    We recommend select some RSA based Encryption Key Type (e.g. RSA-2048_SHA-256).

    images/download/attachments/72093541/encryption_type.PNG

  7. When the message "Certificate has been successfully created" appears, click OK.

  8. Log out of PageScope® Web Connection. If a message appears saying that it is necessary to reboot, reboot the MFP.
    NOTE: If the MFP does not request a reboot, you must log out of the Web interface before continuing the terminal installation.